{ "currentVersion": 11.1, "cimVersion": "3.1.0", "serviceDescription": "

This service contains woodland caribou habitat potential and Draft Caribou Habitat Management Areas (CHMAs). <\/p>\n

\nWoodland caribou habitat potential within the provincial forest of central and northern Saskatchewan has been identified by Saskatchewan, using a forest ecosite geographic information system layer which has been mapped for the SK2 West, Central and East areas. Forest ecosites represent information about a site\u2019s tree species, plant-abundance and soil and site characteristics (McLaughlan et al., 2010). Forest ecosite habitat potential ranks were assigned by individually evaluating the ecosite\u2019s potential to provide forage, refuge and calving habitat. The ecosite rankings were completed for the Boreal Shield and Taiga Shield (SK1), and the Boreal Plain (SK2) by a panel of biologists with expertise on woodland caribou habitat use in Saskatchewan. Detailed methods are described in Roddy (2013). Forest ecosites were mapped with the assigned habitat potential value. Habitat potential refers to the ability or capability of a habitat type to support a wildlife species for its various life requirements. Potential does not consider the current state of the habitat (e.g., recently burned or harvested), but its optimal state. In comparison, habitat suitability reflects the current status of the habitat and incorporates the effects of fire or forest harvesting on seral stage (i.e., sequence of vegetation development over time), habitat loss, reduced use of a habitat by caribou resulting from sensory disturbance adjacent to human land use features, increased risk of mortality, and other factors. <\/p>\n\n

\nDraft Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration. Tier 1 areas were selected because they include high-moderate caribou habitat potential with high levels of observed caribou use and low levels of human-caused disturbance. Tier 2 areas were selected because they include areas of high-moderate woodland caribou habitat potential with observed use and higher levels of wildfire and human-caused disturbance. Tier 3 areas provide general habitat and maintain habitat connectivity between Tier 1 and Tier 2 areas. CHMAs are not intended to be in these fixed locations in perpetuity and may change locations on the landscape in response to habitat disturbance recovery, wildfire, changes in land use, and woodland caribou population trends. Different management actions and strategies will be developed for each Tier based on their stated management objectives and relative importance to and known use by caribou, current habitat condition and potential risks.<\/p>\n\n

\nFrequently Asked Questions: <\/p> \n\n \n

\n\n(A) What do the Tiers mean?\n
\n\u2022 Management objectives in Tier 1 areas include retention of caribou habitat.\n
\n\u2022 Management objectives in Tier 2 areas include restoration of caribou habitat.\n
\n\u2022 Management objectives in Tier 3 areas include general caribou habitat management and maintenance of habitat connectivity across the landscape. \n
\n\u2022 Specific management strategies and actions associated with Tier 1, 2, and 3 areas are not established at this time. Tier management actions and strategies will be developed with stakeholders as part of the range planning process. \n<\/p>\n

\n(B) Can the map of the CHMAs be used for industrial planning purposes? \n
\n\u2022 CHMA maps are not meant for industry planning purposes at this time. Woodland caribou habitat potential maps can be made available and used for industrial planning purposes. Management strategies and actions to meet the identified management objectives within each Tier will be further developed with stakeholders as part of the range planning process. <\/p>", "hasVersionedData": false, "hasArchivedData": false, "hasBranchVersionedData": false, "supportsDisconnectedEditing": false, "supportsDatumTransformation": true, "supportsReturnServiceEditsOption": true, "returnServiceEditsHaveSR": true, "supportsQueryDataElements": true, "datesInUnknownTimezone": false, "supportsRelationshipsResource": true, "syncEnabled": false, "supportedExportFormats": "sqlite,filegdb,shapefile,csv,geojson", "extractChangesCapabilities": { "supportsReturnIdsOnly": false, "supportsReturnExtentOnly": false, "supportsReturnAttachments": false, "supportsLayerQueries": false, "supportsGeometry": false, "supportsFeatureReturn": false, "supportsReturnHasGeometryUpdates": false, "supportsFieldsToCompare": false, "supportsServerGens": false }, "supportedQueryFormats": "JSON", "maxRecordCount": 1000, "maxRecordCountFactor": 1, "capabilities": "Query", "description": "These Draft Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration. Tier 1 areas were selected because they include high-moderate caribou habitat potential with high levels of observed caribou use and low levels of human-caused disturbance. Tier 2 areas were selected because they include areas of high-moderate woodland caribou habitat potential with observed use and higher levels of wildfire and human-caused disturbance. Tier 3 areas provide general habitat and maintain habitat connectivity between Tier 1 and Tier 2 areas. CHMAs are not intended to be in these fixed locations in perpetuity and may change locations on the landscape in response to habitat disturbance recovery, wildfire, changes in land use, and woodland caribou population trends. Different management actions and strategies will be developed for each Tier based on their stated management objectives and relative importance to and known use by caribou, current habitat condition and potential risks.\n\nFrequently Asked Questions:\n(A) What do the Tiers mean?\n\u2022 Management objectives in Tier 1 areas include retention of caribou habitat.\n\u2022 Management objectives in Tier 2 areas include restoration of caribou habitat.\n\u2022 Management objectives in Tier 3 areas include general caribou habitat management and maintenance of habitat connectivity across the landscape.\n\u2022 Specific management strategies and actions associated with Tier 1, 2, and 3 areas are not established at this time. Tier management actions and strategies in SK2 West will be developed with stakeholders as part of the range planning process. \n\n(B) Can the map of the CHMAs be used for industrial planning purposes?\n\u2022 CHMA maps are not meant for industry planning purposes at this time. Woodland caribou habitat potential maps can be made available and used for industrial planning purposes. Management strategies and actions to meet the identified management objectives within each Tier will be further developed with stakeholders as part of the SK2 West range planning process.", "copyrightText": "Ministry of Environment", "advancedEditingCapabilities": { "supportsSplit": false, "supportsReturnServiceEditsInSourceSR": true, "supportsAsyncApplyEdits": true, "supportsApplyEditsbyUploadID": true, "supportedApplyEditsUploadIDFormats": "JSON", "supportsMultipatchOptionForServiceEdits": true, "supportedApplyEditsOptions": {"supportedEditingOptions": 0} }, "spatialReference": { "wkid": 2151, "latestWkid": 2957, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -5120900, "falseY": -9998100, "xyUnits": 4.504455473910538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "initialExtent": { "xmin": -364127.31774387625, "ymin": 5382661.59998808, "xmax": 1293150.9120499254, "ymax": 6801255.73690397, "spatialReference": { "wkid": 2151, "latestWkid": 2957, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -5120900, "falseY": -9998100, "xyUnits": 4.504455473910538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": 176190.7, "ymin": 5805979.6673, "xmax": 728822.8819, "ymax": 6428061.634, "spatialReference": { "wkid": 2151, "latestWkid": 2957, "xyTolerance": 0.001, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -5120900, "falseY": -9998100, "xyUnits": 4.504455473910538E8, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "allowGeometryUpdates": false, "allowTrueCurvesUpdates": false, "onlyAllowTrueCurveUpdatesByTrueCurveClients": false, "supportsApplyEditsWithGlobalIds": false, "supportsTrueCurve": true, "units": "esriMeters", "documentInfo": { "Title": "Untitled.aprx", "Author": "", "Comments": "These Draft Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration. Tier 1 areas were selected because they include high-moderate caribou habitat potential with high levels of observed caribou use and low levels of human-caused disturbance. Tier 2 areas were selected because they include areas of high-moderate woodland caribou habitat potential with observed use and higher levels of wildfire and human-caused disturbance. Tier 3 areas provide general habitat and maintain habitat connectivity between Tier 1 and Tier 2 areas. CHMAs are not intended to be in these fixed locations in perpetuity and may change locations on the landscape in response to habitat disturbance recovery, wildfire, changes in land use, and woodland caribou population trends. Different management actions and strategies will be developed for each Tier based on their stated management objectives and relative importance to and known use by caribou, current habitat condition and potential risks.\n\nFrequently Asked Questions:\n(A) What do the Tiers mean?\n\u2022 Management objectives in Tier 1 areas include retention of caribou habitat.\n\u2022 Management objectives in Tier 2 areas include restoration of caribou habitat.\n\u2022 Management objectives in Tier 3 areas include general caribou habitat management and maintenance of habitat connectivity across the landscape.\n\u2022 Specific management strategies and actions associated with Tier 1, 2, and 3 areas are not established at this time. Tier management actions and strategies in SK2 West will be developed with stakeholders as part of the range planning process. \n\n(B) Can the map of the CHMAs be used for industrial planning purposes?\n\u2022 CHMA maps are not meant for industry planning purposes at this time. Woodland caribou habitat potential maps can be made available and used for industrial planning purposes. Management strategies and actions to meet the identified management objectives within each Tier will be further developed with stakeholders as part of the SK2 West range planning process.", "Subject": "These Draft Caribou Habitat Management Areas (CHMAs) are based on known woodland caribou use and habitat potential mapping; in addition, levels of both human-caused and wildfire disturbances were also taken into consideration.", "Category": "", "Keywords": "Biota,Environment,Habitat Potential,Woodland Caribou,SK2 Central,SK2 West,SK2 East,SK2,Caribou Habitat Managment Areas,CHMAs,Rangifer tarandus caribou" }, "supportsQueryDomains": true, "supportsQueryContingentValues": true, "layers": [ { "id": 1, "name": "FINAL Woodland Caribou Habitat Management Areas - SK2 West", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 20000000, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 2, "name": "FINAL Woodland Caribou Habitat Management Areas - SK2 Central", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 20000000, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" }, { "id": 3, "name": "DRAFT Woodland Caribou Habitat Management Areas - SK2 East", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 20000000, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon" } ], "tables": [], "relationships": [], "enableZDefaults": false, "allowUpdateWithoutMValues": false, "supportsVCSProjection": true, "referenceScale": 0 }